148-B
Blue Chromate Powder

ADVANTAGES:

  • A single dip solution.
  • Economical (saves money).
  • No Nitric acid addition required.
  • Long life and easily controlled.
  • Produces incredibly bright blue chromate.
  • Free of iridescent colors.
  • Good for both chloride acid and cyanide zinc solution.
  • High protection against corrosion, staining, finger prints, and discoloration.
  • Successful in both manual and automatic installations.
  • Easily accepts water soluble lacquer.
  • Processed parts will withstand a 24-48 hour salt spray test.

SOLUTION MAKE UP:

Solution: 1 LITER: 1 GALLON: 100 gals.
Triple-s 148-B salt I 11 g. 1.5 oz. 9 lbs.
Triple-s 148 Salt II 11 g. 1.5 oz. 9 lbs.
For hand dip, 5 seconds: 22 g. 3.0 oz. 18 lbs.
For fully automatic (10-15 sec.): 20 g. 2.0 oz. 15 lbs.
Temperature: 70º-100º F. ----- -----
pH: 1.8 to 2.0 ----- -----

TO PREPARE A NEW SOLUTION:

Simply add 148-B I and II powders to water and stir until dissolved. No Nitric acid is required.

PRESS CYCLE:

  • Zinc plate.
  • Water rinse.
  • Dip in 148-B solution.
  • Cold water rinse.
  • Hot water rinse and dry.

It is recommended that barrel work be dried in a centrifuge equipped with an electric or gas heater. Racked work after the final rinse may be dried by cold or hot air.

The information stated herein is based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed. Since conditions of use are outside our control, user shall, before using, determine the suitability of the product for his intended use and user assumes all risk and liability in connection therewith.
...