PEWTER LOOK
For Brass and Copper		  

This is a unique formula designed to develop a pewter look deposit on Brass, Copper or their alloys by Immersion or rubbing. This is a non-cyanide solution developed to work at room temperature. It is widely used on lighting, fixtures, lamps, sculptures, hardware, gift items, and furniture. The surface will not chip, flake or peel.

Method of application:

  • Clean the part with Cleaner 104 or Silver Polish 105.
  • Rinse with water.
  • Apply the Pewter Look solution with a cloth or brush for 10 seconds; rubbing several times. If parts are originally bright, a pewter silvery deposit will develop. Rinse the part with water or a sponge and wipe dry.
  • If the parts are to be given "dark pewter look" with dark areas, first darken the part in Triblack C-22 antique or Triblack C-1, (according to their instructions, both products, should be diluted with 5 parts of water before use, for 30 seconds to 1 minute) followed by a rinse and drying. Highlight the part with steel wood or steel brush or a buffing wheel. Then apply Pewter Paste on top of the highlighted area. Clean again and dry.
  • Lacquer the parts using Triple-s WSL-55 or Triblac 747, our water-soluble non-flammable lacquer.

The information stated herein is based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed. Since conditions of use are outside our control, user shall, before using, determine the suitability of the product for his intended use and user assumes all risk and liability in connection therewith.